- Enables advanced measurement features on SSA3000X and SSA3000X Plus
- Supports OBW, ACPR, channel power, and TOI analysis
- Includes DANL and noise floor evaluation tools
- Allows power vs. time and rise/fall time measurements
- Activated by software license – no hardware required
- Real-time 1000BASE-T (Gigabit Ethernet) signal decoding
- Triggering on specific Ethernet frames, addresses, and errors
- Detailed protocol-level packet analysis
- CRC and frame error detection
- Optimized for telecom, automotive, and industrial networks
- Real-time 1000BASE-T1 Ethernet decoding
- Triggering on frames, patterns, and errors
- Comprehensive protocol layer visibility
- Automatic detection of CRC and alignment errors
- Optimized for autonomous and V2X systems
- Real-time 100BASE-T Ethernet decoding
- Advanced triggering on specific Ethernet frame contents
- Detailed protocol layer analysis
- Automatic error detection and highlighting
- Ideal for automotive and industrial Ethernet debugging
- Real-time 100BASE-T1 Ethernet decoding
- Triggering on specific frames and errors
- Detailed protocol layer analysis
- CRC and alignment error detection
- Ideal for ADAS and in-vehicle networking
- Full USB 2.0 compliance test capability
- Automated routines for faster validation
- Analysis of timing, voltage, and signal integrity
- Error detection for specification violations
- Ideal for device certification and debugging
- Real-time USB 2.0 protocol decoding
- Triggering on specific packets or events
- Error detection for CRC and protocol violations
- In-depth USB traffic and control analysis
- Essential for embedded and hardware interface engineers
- Adds EMI pre-compliance testing to SSA3000X and SSA3000X Plus
- Includes CISPR-compliant RBW filters: 200 Hz, 9 kHz, 120 kHz
- Supports peak, average, quasi-peak, and RMS detectors
- Provides limit line editing and marker table features
- Activated via software license – no extra hardware required
- Real-time eye diagram generation
- Jitter and noise measurement and analysis
- Automated mask testing for signal compliance
- Detailed analysis of high-speed digital signals
- Suitable for USB, HDMI, and serial data interfaces
- Enables pulse train generation on SSG5000A series
- Supports up to 2047 pulses per trigger
- Ideal for advanced RF modulation and timing tests
- Useful for radar, communication, and aerospace applications
- Software license activation, no hardware modification required
- Power quality metrics: voltage, current, power factor, harmonics
- Inrush current and harmonic analysis
- Switching loss and efficiency measurement
- Ripple, modulation, and turn-on/off testing
- Ideal for power electronics and motor drive evaluation
- Includes reflection (S11) license and hardware accessories
- Enables VSWR, return loss, and reflection coefficient measurements
- Compatible with SSA3000X Plus spectrum analyzers
- Ideal for antenna testing and impedance matching
- All-in-one bundle with software activation and RF adapters
- Includes reflection measurement license and hardware
- Measures VSWR, return loss, and reflection coefficient
- Includes directional bridge and RF adapters
- Optimized for SSA3000X spectrum analyzers
- Perfect for antenna and RF system testing
- Adds S11 reflection measurement capability to SSA3000X Plus spectrum analyzers
- Supports VSWR, return loss, and reflection coefficient analysis
- Ideal for antenna testing, impedance matching, and RF tuning
- Software activation – no additional hardware required (requires TG option)
- Simple license upgrade via activation code
- Enables MIL-STD-1553B protocol decoding on SDS3000HD
- Supports frame-level analysis and time tagging
- Identifies errors, command/status words, and RT addresses
- Designed for aerospace and military bus systems
- Software license activation – no extra hardware required
- Enables ARINC 429 protocol decoding on SDS3000HD
- Displays label, SDI, data, SSM, and parity fields
- Real-time decoding with time correlation to waveform
- Ideal for avionics system testing and debugging
- Software-based license activation, no extra hardware
- Upgrades SDS3000HD oscilloscope bandwidth from 350 MHz to 500 MHz
- Software-only license activation—no hardware changes needed
- Improves measurement accuracy for fast analog and digital signals
- Ideal for RF, power electronics, and embedded system diagnostics
- Quick installation via license key input
- Upgrades SDS3000HD oscilloscope bandwidth from 350 MHz to 1 GHz
- Enables high-frequency signal capture and analysis
- Ideal for RF, high-speed digital, and communication systems
- Software-only activation—no hardware changes required
- Simple upgrade process via license key input
- Upgrades SDS3000HD oscilloscope from 500 MHz to 1 GHz bandwidth
- Ideal for RF, communications, and fast embedded systems
- Improves visibility and accuracy for high-speed signals
- License activation via software key—no hardware upgrade needed
- Maximizes oscilloscope performance for advanced applications
- Enables CAN FD decoding on SDS3000HD oscilloscopes
- Supports flexible data rates, extended IDs, and CRC
- Real-time protocol decoding with waveform correlation
- Ideal for automotive and industrial communication systems
- Simple software license activation, no extra hardware
נצפו לאחרונה
- Bandwidth: DC to >5 GHz
- Differential Input Resistance: 20 kΩ
- Differential Input Capacitance: 400 fF
- Attenuation Ratio: 10:1
- Input Dynamic Range: ±2.5 V
- Offset Voltage Range: ±12 V
- Real-time 1000BASE-T1 Ethernet decoding
- Triggering on frames, patterns, and errors
- Comprehensive protocol layer visibility
- Automatic detection of CRC and alignment errors
- Optimized for autonomous and V2X systems
- Adds tracking generator functionality to SSA3000X Plus spectrum analyzers
- Enables frequency response testing of RF components
- Ideal for analyzing filters, antennas, and amplifiers
- Creates a basic scalar network analyzer setup
- Activated via software license – no hardware modification needed
- 100 MHz bandwidth for accurate high-frequency current measurements.
- Dual measurement ranges: 5 A (1 V/A) and 30 A (0.1 V/A).
- High accuracy: ±1% ±1 mA (5 A); ±1% ±10 mA (30 A).
- Over-current protection with audible and visual indicators.
- Automatic zero adjustment for stable measurements.
- Powered by a standard 12 V/1 A DC adapter.
- Adds Distance-To-Fault (DTF) testing to SVA1000X analyzers
- Locates impedance mismatches and cable faults in RF systems
- Displays return loss vs distance using VNA sweep
- Supports distance scaling via cable velocity factor
- Ideal for antenna, telecom, and broadcast cable diagnostics
- Expands frequency range of SHA850 analyzers from 1.5 GHz to 3.6 GHz
- Enables advanced RF, wireless communication, and EMI signal analysis
- Software-based upgrade — no hardware modification required
- Instantly activates via license key for fast deployment in the field
- Compatible with all Siglent SHA850 handheld spectrum analyzer models




























