• Resolution: 1 μHz
• Initial accuracy: ±1 ppm (25 ℃), ±2 ppm (0～40 ℃)
• 1st-year aging: ±1 ppm (25 ℃)
• 10-year aging: ±3.5 ppm (25 ℃)

Sine Characteristics

• Frequency: 1 μHz to 60 MHz (SDG1062X Plus)
• Frequency: 1 μHz to 30 MHz (SDG1032X Plus)
• Harmonic distortion (0 dBm, 50Ω Load):
  • ≤ -65 dBc (≤10 MHz)
  • ≤ -60 dBc (10 MHz–20 MHz)
  • ≤ -55 dBc (20 MHz–40 MHz)
  • ≤ -50 dBc (40 MHz–60 MHz)
• Total Harmonic Distortion: ≤ 0.075% (0 dBm, 10 Hz–20 kHz)
• Non-harmonic spurious (0 dBm, 50Ω Load):
  • ≤ -70 dBc (≤50 MHz)
  • ≤ -65 dBc (>50 MHz)

Square Characteristics

• Frequency: 1 μHz to 20 MHz
• Rise/fall times: ≤ 10 ns (10%–90%, 1Vpp, 50Ω Load)
• Overshoot: ≤ 3% (100 kHz, 1Vpp, 50Ω Load)
• Duty cycle: 0.001% to 99.999% (limited by frequency setting)
• Jitter (rms), cycle to cycle: ≤ 200 ps (1Vpp, 50Ω Load)

Pulse Characteristics

• Frequency: 1 μHz to 20 MHz
• Pulse width: ≥ 19.4 ns
• Pulse width accuracy: ±(0.01% + 0.5 ns)
• Rise/fall times: ≤ 22.4 ns (10%–90%, 1Vpp, 50Ω Load)
• Overshoot: ≤ 3% (100 kHz, 1Vpp, 50Ω Load)
• Duty cycle: 0.001% to 99.999% (limited by frequency setting)
• Jitter (rms), cycle to cycle: ≤ 200 ps (1Vpp, 10 ns edge, 50Ω Load)

Noise Characteristics

• -3dB bandwidth: 60 MHz
• Adjustable bandwidth range: 20 to 60 MHz

Ramp Characteristics

• Frequency: 1 μHz to 2 MHz
• Symmetry: 0% to 100%
• Linearity: ≤ 1% of peak-to-peak output (1 kHz, 1Vpp)

Arbitrary Wave Characteristics

• DDS mode frequency: 1 μHz to 20 MHz
• DDS mode sampling rate: 250 MSa/s
• DDS mode waveform length: 16 kpts
• DDS mode rise/fall times: ≤ 6 ns (10%–90%, 1Vpp, 50Ω Load)
• True Arb mode sampling rate: 250 MSa/s
• True Arb mode waveform length: 24 to 8M pts
• True Arb mode jitter (rms): ≤ 200 ps (cycle to cycle, “010101” pattern, 1Vpp, 50Ω Load)
• Interpolation mode: 0-order hold
• Sequence run mode: Continuous

PRBS Characteristics

• Bit rate: 1 μHz to 40 Mbps
• Pattern length: 2ⁿ–1, where n = 3, 4, ..., 32
• Rise/fall time: ≤ 10 ns (1Vpp, 50Ω Load)

DC Characteristics

• Output range: -10 V to +10 V (HiZ Load)
• Accuracy: ±(1% + 2 mV) (HiZ Load)

Harmonic Output Characteristics

• Order: Up to 16
• Type: Even, Odd, All

Output Characteristics

• Range: 2 mVpp to 20 Vpp (≤20 MHz, HiZ Load)
• Range: up to 10 Vpp (>20 MHz, HiZ Load)
• Accuracy: ±(1% + 1 mV) (10 kHz sine, 0 V offset)
• Amplitude flatness: ±0.3 dB (50Ω, 2.5Vpp, relative to 10 kHz sine)
• Output impedance: 50 Ω (10 kHz sine)
• Output current: -200 mA to +200 mA
• Channel isolation: ≤ -60 dBc

Modulation Characteristics

• AM modulation depth: 0% to 120%
• AM modulation frequency: 1 mHz to 1 MHz (internal modulation source)
• FM modulation frequency deviation: 0 to 0.5 × BW (BW = max output frequency)
• PM modulation phase deviation: 0° to 360° (internal modulation source)

Burst Characteristics

• Carrier frequency: 2 mHz to BW (BW = max output frequency)
• Carrier phase: -360° to +360°
• Internal period: 1 μs to 1000 s

Sweep Characteristics

• Carrier frequency: 1 μHz to BW (BW = max output frequency)
• Sweep time: 1 ms to 500 s

Frequency Counter Characteristics

• Frequency range: 100 mHz to 200 MHz (DC and AC coupling)
• Input amplitude: 0.1 Vrms to ±2.5 V (DC coupling, ≤100 MHz)

Reference Clock Input/Output

• Reference clock input frequency: 10 MHz
• Reference clock output amplitude: 2 to 3.3 Vpp (HiZ Load)

Auxiliary In/Out Characteristics

• Trigger input VIH: 2 V to 5.5 V
• Trigger input VIL: -0.5 V to 0.8 V
• Trigger output VOH: ≥ 3.8 V (IOH = 8 mA)

General Characteristics

• Power consumption: 25 W to 50 W
• Voltage: 100–240 Vrms ±10%, 50/60 Hz
• Display luminance: ≥ 300 cd/m²
• Operating temperature: 0°C to 40°C
• Storage temperature: -20°C to 60°C
• Operating humidity: 5% to 90% (≤30°C)

Mechanical Characteristics

• Dimensions: 260.3 × 107.2 × 295.7 mm
• Net weight: 3.48 kg
• Gross weight: 4.4 kg